JT801 Deammoniated agent

Uses and characteristics

JT801 type ammonia removal agent is a newly developed new product, which is suitable for the removal of ammonia in raw materials such as hydrogen nitrogen and hydrocracking low gas at room temperature. Under normal temperature conditions (10-50℃), it has high ammonia capacity and purification degree. After its treatment, the ammonia content can be less than 0.5PPm, and the penetration ammonia capacity is greater than 5%, which can meet the needs of industrial production.

Physical performance

Appearance	White ball
Specification(mm)	φ3-5
Intensity N/particle	>30
Specific surface(m²/g)	>80
Aperture(ml/g)	>0.3
Bulk specific weight(g/ml)	0.7~1.1

Normal technical condition and depuriating standards

Operational pressure Normal(MPa)	pressure-3.0MPa
Operational temperature(℃)	10—50℃
Airspeed(h-1)	500—1000h-1
The percentage of ammonia in the importing raw materials	1~10PPm
The ratio between the height of bed and the column diameter	>4
The content of ammonia in the exporting raw materials	<0>
The penetration content of ammonia	>5%

Note

Condensate water must not be allowed to flow into the industrial raw materials , so as to prevent the loss of active constituent.
During the operation, sulfur removal must go before decarbonization.
The temperature of the charge gas should be kept at room temperature. It is bad for reaction to improve the temperature.

PRODUCTS

Uses and characteristics

Physical performance

Normal technical condition and depuriating standards

Note

Condensate water must not be allowed to flow into the industrial raw materials , so as to prevent the loss of active constituent.

During the operation, sulfur removal must go before decarbonization.

The temperature of the charge gas should be kept at room temperature. It is bad for reaction to improve the temperature.